It is often necessary to use optical signals for warning and indicating purposes in very noisy surroundings. The BLK LED emits clearly recognisable signals. The sturdy housing conforms to protection degree IP 65 and is suitable for both indoor and outdoor use. The signalling light is available in four different cap colours.

The modern electronics are mounted on a printed circuit board of glass fibre reinforced epoxy resin. The weather-proof coated aluminium die-cast housing is equipped with a ribbed cap of impact-resistant plexiglass.
The signalling light is provided with a M20 cable gland for cable diameters of 8 to 12 mm. Three modes (continous, blinking and flash light) are switchable.
The SLD 1 rotating mirror beacon is a version for mounting on horizontal sur faces. It can also be fitted on slightly sloping surfaces (for example top of a car) by placing a DPR rubber gasket between it and the sur face. It can further be mounted on an ASFL extension flange placed on a vertical rod. The SLD 2 rotating mirror beacon can be mounted on an ASTR extension rod. The connection cable then runs through
the extension rod. This beacon is intended for use on vehicles and is only avail able for operation on 12 VDC or 24 VDC power supplies.

Also it is often necessary to use optical signals for warning, indicating and signalling purposes in areas where vibrations may occur. Such areas are machines, vehicles, cranes, and so on. The Signalling Light
BLG-LED provides this signalling capacity. The Signalling Light BLG-LED is activated by turning on the supply voltage. It is available in various cap colours. The solid rubber housing conforms to protection degree IP 67 and is suitable for both indoor and outdoor use.

The housing is made of solid rubber (elastic TPF). The cap consists of impact polycarbonate.

Please see below "ORDERING INFORMATION" for product diffrent options and relevant part numbers.