In potential explosive atmospheres it’s often necessary to use optical signals for warning, indicating and signalling. The Ex-Strobe light BZ2/BD22 offers
this option. The item is made for continuous operation. The protection degree is IP 66. The housing is made of impact resistant Polycarbonate. The cap is made of coloured Polycarbonate. The strobe energy is 15 Joule.

The ExII strobe light dSLB 20 offers these signalling possibilities. It is designed for continuous operation. The dSLB 20 strobe light is activated by switching on the power supply and is available with various rated voltages. The sturdy housing conforms to protection degree IP 66 / 67 and can be installed both indoors and outdoors. The ExII strobe light consists of a small flameproof housing of aluminium containing the electronics and a glass cap of hardened borosilicate lass.
The terminal enclosure is realised in the explosion protection mode “in creased safety”. To built up a signalling combination please use the mounting plate, made by V4A, with integrated junction box from the accessories.

The BDK strobe light emits clearly recognisable signals. The sturdy housing conforms to protection degree IP 54 and is suitable for both indoor and outdoor use. The modern electronics are mounted
on a printed circuit board of glass fibre reinforced epoxy resin. A powerful electronic flash tube converts the electrical energy stored in the flash capacitor into light flashes with high efficiency. The weather-proof coated aluminium die-cast housing is equipped with a ribbed cap of impact-resistant plexiglass. The strobe light is provided with a M20 cable gland for cable diameters of 8 to 12 mm.

The BLE15 Strobe Light is designed for audio signals, warnings, and visual signals for indoors and outdoors. The high-powered, 15-joule flash makes the signal easily recognizable even in direct sunlight. The lamp also features a good 360° signal effect.

The BLK strobe light emits clearly recognis able signals. The sturdy housing conforms to protection degree IP 65 and is suitable for both indoor and outdoor use. The strobe light is available in five different cap colours.
The BLK strobe light also comes in a version with cover contact for 12 VDC and 24 VDC.

The BLS strobe light is an all-purpose optical signalling device for use as, for example, a continuous, warning or alarm strobe light. Thanks to the ribbed cap, which is available in five different colours, an extremely wide spread of light is achieved. The strobe comes with a flash energy of alternatively 5 joule or 15 joule for continuous operation.

The Strobe Light BLG 10 provides this signalling capacity with a flash energy of 10 Joule. The Strobe Light BLG 10 is activated by turning on the supply voltage. It is available in various cap colours. The solid rubber housing conforms to protection degree IP 67 and is suitable for both indoor and outdoor use.

With its modular, stylish housing the Xenon Strobe Light Profi Flash can be mounted on the wall or standing. The strobe light is available with 6 different caps and 2 different standard housing colours. By design, the device conforms to protection degree IP 54 and is suited for inside and outside use. The modular housing design enables a variety of solutions with regard to design and function. All housing parts are made of impactresistant ABS, and the cap consists of polycarbonate. The flash frequency amounts to approx. 60 flashes per minute (1 Hz). In addition to the standard housing colours, optional colours may be available, depending on the number of devices ordered.

Please see below "ORDERING INFORMATION" for product diffrent options and relevant part numbers.